Before Using the
Machine
1
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
7.
Enter a name, then press [OK].
The maximum number of characters that you can enter for a key
name is 10.
The assigned name appears on the key.
If you press [OK] without entering any characters, the key name
reverts to its current name (M1 to M4).
8.
Press [Cancel].
9.
Press [Done].
Pressing [Cancel] → [Done] only names the selected key ([M1] to
[M4]), but does not recall the stored settings. If you press [OK] →
[Done], the name is stored in the selected key ([M1] to [M4]), and the
settings are recalled at the same time.
Recalling Copy Settings
1.
Press
(COPY).
2.
Press [Special Features].
3.
Press [Mode Memory].
Back
Previous
4.
Select the key containing the copy settings that
you want to recall.
5.
Verify the settings, then press [OK].
6.
Press [Done].
If you select a key that does not have copy settings stored in it, [OK]
is grayed out and cannot be pressed. Select another key that has
copy settings stored in it, or press [Cancel].
–
Recalling copy settings from memory cancels the current copy
settings.
–
You can make changes to the recalled copy settings.
–
If you press another key, the copy settings stored in that key are
recalled.
Erasing Copy Settings
1.
Press
(COPY).
2.
Press [Special Features].
3.
Press [Mode Memory].
4.
Press [Store/Erase].
5.
Press [Erase].
TOP
Next
3-32