Stack Bypass; Printing And Scanning - Canon imageCLASS MF7460 Reference Manual

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
8.
Close the feeder.
Be careful not to get your fingers caught.
9.
Follow the instructions on the touch panel
display.
The screen indicating the location of the paper jam repeatedly
appears on the touch panel display until the paper jam is entirely
cleared. For more information, see "Clearing Jams, " on p. 10-3.
Back Previous

Stack Bypass

■
If a paper jam occurs inside the stack bypass, a screen similar to
the one shown below appears on the touch panel display.
Check the location of the paper jam, and follow the procedure
described below, and the procedure that appears on the touch
panel display, to remove the jammed paper.
1.
Remove all paper from the stack bypass.
2.
Remove any jammed paper.
If you cannot remove the jammed paper, follow the procedures
described in "Fixing Unit (Inside the Main Unit), " on p. 10-8.
TOP
Next
10-7