Canon imageCLASS MF7460 Reference Manual page 76

Before Using the
Machine 1
Paper Selection
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
You can manually specify a paper size or set the machine to
automatically select the paper size for you.
- If you are copying an original with an image that extends all the way to
the edges onto the same size paper at a copy ratio of 100%, the
periphery of the original image may be cut off slightly on the copy. For
more information on how much may be cut off, see "Scanning Area, " on
p. 2-4.
- If you select [Envelope], [Transparency], or [Labels], make sure that you
do not specify any Finishing modes (Collate or Group).
- If Stack Bypass Standard Settings in Common Settings (from the
Additional Functions screen) is set to [On], and the paper size/type have
been stored, the selected paper size/type are displayed on the screen.
(See "Stack Bypass Standard Settings, " on p. 11-7.)
Automatic Paper Selection
■
The machine automatically selects the copy paper size.
- The Automatic Paper Selection mode is available only if the originals are
fed from the feeder.
- The Automatic Paper Selection mode cannot be used with the Auto
Zoom or Image Combination mode.
- You cannot use the Automatic Paper Selection mode when copying the
following types of originals. Copy these originals using the Manual Paper
Selection mode.
- Nonstandard size originals
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
- STMT or STMTR originals that are placed on the platen glass
- If Drawer Eligibility For APS/ADS in Common Settings (from the
Additional Functions screen) is set to [Off ] for a particular paper source,
you cannot make copies on paper loaded in that paper source in the
Automatic Paper Selection mode. (See "Drawer Eligibility For APS/ADS, "
on p. 11-6.)
Back Previous
1.
Press (COPY).
2.
Place your originals.
3.
Press [Paper Select].
4.
Press [Auto], then [Done].
When the feeder is closed, the paper source holding that paper size
is highlighted along with [Auto].
5.
Press (Start).
TOP
Next
3-5