Fax Dialing Features; Switching Temporarily To Tone Dialing - Canon imageCLASS MF7460 Reference Manual

Before Using the
Machine 1

Fax Dialing Features

Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index

Switching Temporarily to Tone Dialing

■
If your machine is set for pulse dialing, use the procedure below to
switch to tone dialing to use information services (e.g., banks, airline
reservations, and hotel reservations).
When you use the fax information services, you cannot use the Recall
mode.
1.
Press (SEND).
2.
Press [New Address].
3.
Press [Fax].
4.
Press [Hook].
Back Previous
5.
Enter the number of the fax information service
using – (numeric keys).
If you press [One-touch Buttons]:
●
– Select the desired one-touch button, then press [Done].
One-touch buttons are assigned a three digit number. To specify
a destination using a one-touch button's three digit number,
enter the three digit number using
6.
When your call is answered and you hear the
recorded message of the information service,
press [Tone].
If you are already using this machine with tone dialing, this step is
not necessary.
After you press [Tone], a <T> appears on the touch panel display.
7.
Enter the numbers requested by the information
service using – (numeric keys), , and .
If you require more information about the service, contact the
company providing the service.
TOP
Next
– (numeric keys).
4-42