Canon imageCLASS MF7460 Reference Manual page 399

Before Using the
Machine 1
Adjustment/Cleaning
Original and Paper
2
Transfer Roller Cleaning
Copying
3
Fixing Unit Cleaning
Feeder Cleaning
Sending and
Receiving 4
Special Mode M
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
Special Mode N
10
Appendix
11
Table of Contents
Index
Setting Item
Standard
Low
Moderate
High
Auto
Cleans the transfer roller. (See "Transfer Roller, " on p. 9-8.)
Cleans the fixing unit. (See "Fixing Unit, " on p. 9-3.)
Cleans the rollers of the feeder. (See "Automatic Feeder Cleaning, " on p. 9-8.)
Sets to improve print quality or fix irregular print density. If print quality decreases or an
irregularity in the print density appears, transcription output may not function adequately.
Normal transcription output.
Lower than normal transcription output.
Selecting [Low] may be effective when printing on paper that contains a lot of moisture because
it was stored for a long period of time after opening, or when printing on recycled paper.
Slightly higher than normal transcription output.
Higher than normal transcription output.
Selecting [High] may be effective when printing on the heavyweight paper.
Sets whether to prevent paper curls or jams which may occur when printing on paper that has
absorbed moisture.
– Do not use paper that has been exposed to high temperature or humidity for an extended
period of time. Printing on such paper will frequently result in a paper jam.
– Printing times with Special Mode N activated are longer than when the function is not used.
– If you select [Medium] or [High] when paper is not moistened, the print quality may be
deteriorated.
Automatically switches to the appropriate curl prevention level.
Back Previous Next
Description
TOP
11-16