Canon imageCLASS MF7460 Reference Manual page 396

Before Using the
Machine 1
Communications Settings
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Select Cassette
Switch A
Switch B
Switch C
Switch D
Receive Reduction
On
RX Reduction
Reduce Direction
Off
Received Page Footer
Sets how the machine prints documents when there is no paper matching the size of the
received document. (See "Paper Drawer Selection, " on p. 4-72.)
The image is printed over two sheets of paper that have the same combined size as the received
document.
– On
– Off
The image is printed with blank space on paper that has the same width as the received
document.
– On
– Off
The image is reduced and printed on paper that differs in width from the received document.
– On
– Off
The image is printed on paper that is larger in size than the received document.
– On
– Off
Sets whether the received images print out at a reduced size. (See "Received Image Reduction, "
on p. 4-73.)
Image reduction is turned on.
Selects the reducing type.
– Auto
– Fix. Red. (75%, 90%, 95%, or 97%)
Selects the reducing direction.
– Ver. Hor.
– Vertical Only
Image reduction is turned off.
Sets whether to insert the machine's fax number and the sender information on received faxes.
– Off
– On
Back Previous Next
TOP
11-13