Canon imageCLASS MF7460 Reference Manual page 94

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
2 On 1
●
This setting reduces two 1-sided originals or one 2-sided original to
fit onto one side or both sides of the copy sheet.
Originals
or
1
1
2
4 On 1
●
This setting reduces four 1-sided or two 2-sided originals to fit onto
one side or both sides of the copy sheet.
Originals
or
1
1
2
3
3
4
1.
Press (COPY).
2.
Place your originals.
3.
Press [Special Features].
4.
Press [Image Combination].
5.
Select the original size , then press [Next].
If you are copying two-sided originals, press [2-Sided Original] →
select the type of two-sided original → press [OK] → [Next].
Details of each item are shown below.
Copy
1 2
6.
Select the desired Image Combination feature,
then press [Next].
Copy
If you want to make two-sided copies, press [2-Sided Copy] → select
the type of two-sided orientation → press [OK] → [Next].
Details of each item are shown below.
1 2
3 4
If you want to specify the image order, press [Option] → select the
image order → press [Done] → [Next].
If you do not change the image order by pressing [Option], the
images are printed as follows:
Back Previous
[Book Type]: The front and back sides of the original
have the same top-bottom orientation.
[Calendar Type]: The front and back sides of the original
have opposite top-bottom orientations.
– To select an A or B series paper size, press [A/B-size].
– [2-Sided Original] cannot be selected if STMTR is the selected
original size.
[Book Type]: The front and back sides of the copy will
have the same top-bottom orientation.
[Calendar Type]: The front and back sides of the copy will
have opposite top-bottom orientations.
2 On 1: Left → Right
4 On 1: Upper Left → Upper Right
→ Lower Right
TOP
Next
Lower Left
→
3-23