Canon imageCLASS MF7460 Reference Manual page 80

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
1.
Press (COPY).
2.
Place your originals.
3.
Press the original type drop-down list.
4.
Select the original type.
5.
Press (Start).
To cancel all settings and return the machine to the Standard mode,
press
(Reset).
Exposure
■
You can adjust the density to the most appropriate level for the
original either automatically or manually.
Adjusting Automatically
1.
Press (COPY).
2.
Place your originals.
3.
Press [A].
The machine automatically adjusts the copy exposure to the level
best suited to the quality of the original.
An automatic copy exposure adjustment may not work with
transparencies. In this case, adjust the copy exposure manually by
pressing [Light] or [Dark].
Back Previous
4.
Press (Start).
To cancel all settings and return the machine to the Standard mode,
press (Reset).
Adjusting Manually
1.
Press (COPY).
2.
Place your originals.
3.
Press [Light] or [Dark].
Press [Light] to move the indicator to the left to make the exposure
lighter, or press [Dark] to move it to the right to make the exposure
darker.
4.
Press (Start).
To cancel all settings and return the machine to the Standard mode,
press (Reset).
TOP
Next
3-9