Canon imageCLASS MF7460 Reference Manual page 418

Before Using the
Machine 1
System Settings
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Off
On
Server
Workgroup
Comment
LM Announce
SNMP Settings
Use SNMP
On
Community Name
Writable SNMP
Get Printer Management Information
from Host
Off
Enable Dedicated Port
Ethernet Driver Settings
Auto Detect
On
SMB client is not used.
SMB client is used.
Enters the NetBIOS name of the machine.
Enters the name of the workgroup the machine belongs to.
Enters a comment about the printer.
Sets if the machine notifies the LAN Manager of its existence.
– Off
– On
Sets detailed information about SNMP.
Sets whether to activate SNMP.
Activates SNMP.
Sets SNMP community name (default: public).
Enables computers on the network to access the machine and modify its settings.
– On
– Off
Sets whether to get printer management information from host.
Deactivates SNMP.
Sets or browses detailed information on the machine with a Canon printer driver or utility.
– On
– Off
Specifies the type of network connection.
Selects the detection method of Ethernet driver.
Sets the machine to determine the communication mode (Half duplex/Full duplex) and
Ethernet type (10Base-T/100Base-TX) automatically.
Back Previous Next
TOP
11-35