Canon imageCLASS MF7460 Reference Manual page 88

Before Using the
Machine 1
Two-Sided Copying
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
This mode enables you to make two-sided copies from one-
sided or two-sided originals, or make one-sided copies from
two-sided originals.
– You may not be able to make two-sided copies on some types of paper,
depending on the paper.
– If you are copying in the 2-Sided mode, align the top edge of the original
with the back edge of the platen glass (by the arrow in the top left
corner), or with the back edge of the feeder.
– The 2-Sided mode you have selected is displayed above [2-Sided] on the
Copy Basic Features screen.
– Paper used to make two-sided copies must conform to the following
specifications:
– Paper size: 11" x 17", LGL, LTR, LTRR, EXEC, STMTR (envelopes cannot be
used for two-sided copying)
– Paper weight: 17 to 24 lb bond (64 to 90 g/m
If you select [Irreg. Size] for copying, you cannot use the 1 ▶ 2-Sided, 2
–
▶ 2-Sided, Book ▶ 2-Sided, or 2-page Separation mode. (See "2-Page
Separation, " on p. 3-22.)
If you select [Envelope] for copying, you cannot use 1 ▶ 2-Sided, 2 ▶ 2-
–
Sided, Book ▶ 2-Sided, 2-page Separation mode. (See "2-Page
Separation, " on p. 3-22.)
2 )
Back Previous
Making Two-Sided Copies from One-Sided Originals (1 ▶ 2-
●
Sided)
This feature enables you to make two-sided copies from one-sided
originals.
Originals
Making Two-Sided Copies from Two-Sided Originals (2 ▶ 2-
●
Sided)
This feature enables you to make two-sided copies from two-sided
originals. If the originals are placed in the feeder, they are
automatically turned over to make two-sided copies.
Original
TOP
Next
Copy
Copy
3-17