Before Using the
Machine
1
Changing/Canceling Selected Settings
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
You can use the Setting Confirmation screen to change or
cancel selected copy modes.
1.
Press [Setting Confirmation].
2.
Press the key of the copy mode to be changed or
canceled.
–
A right triangle (▶) on a copy mode setting key indicates that
more setting screens are available by pressing the key.
–
If you select a copy mode setting key without a right triangle (▶)
and then press [Done], the selected copy mode is canceled.
3.
Change or cancel the selected copy mode (for
example, Sharpness).
To change a copy mode:
●
–
Perform the same steps used for setting the mode. Change the
setting as you desire, then press [OK].
To cancel a copy mode:
●
–
Press [Cancel].
4.
Press [Done].
Back
Previous
Next
TOP
3-36