Canon imageCLASS MF7460 Reference Manual page 128

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
7.
Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display, then press
each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning
is complete.
– To cancel the scan settings, press [Scan Settings], then [Option],
then [Cancel].
– To cancel all settings and return the machine to the Standard
mode, press (Reset).
Automatic Density Adjustment
The machine automatically adjusts the scan density to the level
best suited to the quality of the original.
– If you select the Color mode, automatic density adjustment cannot be
used.
– If you set the automatic density adjustment, the original type setting is
disabled.
1.
Press (SEND).
2.
Place your originals.
3.
Specify the destination.
4.
Press [Scan Settings].
5.
Press [Option].
6.
Press [A], then press [OK].
The machine automatically adjusts the scan density to the level best
(Start) once for suited to the quality of the original.
An automatic scan density adjustment may not work with
transparencies. In this case, adjust the scan density manually by
pressing [Light] or [Dark].
7.
Press
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display, then press
each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning
is complete.
–
–
Back Previous
(Start).
To cancel the scan settings, press [Scan Settings], then [Option],
then [Cancel].
To cancel all settings and return the machine to the Standard
mode, press (Reset).
TOP
Next
(Start) once for
4-17