Canon imageCLASS MF7460 Reference Manual page 101

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
High
●
This setting enhances the edges of original images so that faint or
fine text is reproduced with a sharper contrast. This setting is
particularly suited for copying blueprints and faint pencil drawn
images.
Original
High Set
The world's coral reefs, where
The world's coral reefs, where
brilliantly colored fish and a brilliantly colored fish and a
myriad of other tropical creatures myriad of other tropical creatures
come together.
come together.
Aptly nicknamed
Aptly nicknamed
"Tropical Forests under the sea",
"Tropical Forests under the sea",
these spots of breathtaking these spots of breathtaking
beauty serve as home to beauty serve as home to
countless varieties of life, countless varieties of life,
and to us of the land,
and to us of the land,
this alluring,
this alluring,
dream-like world
dream-like world
forms a tropical
forms a tropical
paradise filled paradise filled
with romance. with romance.
1.
Press (COPY).
2.
Place your originals.
3.
Press [Special Features].
4.
Press [Sharpness].
5.
Press [Low] or [High] to adjust the sharpness ,
then press [OK].
6.
Press [Done].
To copy text or lines clearly, the setting should be towards [High]. To
copy originals containing printed images or other halftones, the
setting should be towards [Low].
7.
Copy
High Not Set
■
The world's coral reefs, where
brilliantly colored fish and a
myriad of other tropical creatures
come together.
You can set any possible combination of copy modes and store
Aptly nicknamed
"Tropical Forests under the sea",
them in a memory key. There are four memory keys, and they can
these spots of breathtaking
beauty serve as home to
countless varieties of life,
be assigned names for increased convenience. This feature is useful
and to us of the land,
this alluring,
dream-like world
for storing frequently used copy settings.
forms a tropical
paradise filled
with romance.
The copy settings stored in memory are not erased, even if the power is
turned off.
1.
2.
3.
4.
Back Previous
Press (Start).
– To cancel this setting, press [Special Features] → [Sharpness] →
[Cancel].
– To cancel all settings and return the machine to the Standard
mode, press (Reset).
Memory Keys
Storing Copy Settings
Press (COPY).
Specify the copy settings that you want to store
on the Copy Basic Features screen and/or
Special Features screen.
In the example above, the Finisher and Two-sided modes are
specified.
Press [Special Features].
Press [Mode Memory].
TOP
Next
3-30