Before Using the
Machine
1
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
5.
Press [Done] repeatedly until the Send Basic
Features screen appears.
Storing/Editing Favorites Buttons
■
You can set any possible combination of send settings and register
them in a favorites button in memory. There are 18 favorites
buttons and they can be assigned names for increased
convenience. This feature is useful for registering frequently used
send settings.
–
The send settings registered as favorites buttons in memory are not
erased, even if the power is turned off.
–
If an address included in a favorites button is deleted from the Address
Book, it is also deleted from the settings registered in the favorites
button.
Registering/Editing a Favorites Button
1.
Specify the send settings that you want to
register.
2.
Press
(Additional Functions).
3.
Press [Communications Settings] → [TX
Settings] under <Common Settings> → [▼] →
[▼] → [Register Favorites Button].
The Register Favorites Button screen appears.
Back
Previous
4.
Select a Favorites Button ([M1] to [M18]) for
registering the send settings, then press
[Register/Edit].
–
If the desired Favorites Button is not displayed, press [▼] or [▲]
to scroll to the desired Favorites Button.
–
Keys that already have settings stored in them are displayed with
a black square in the lower right corner of the key.
5.
Press [Register].
–
If you select a key that already has settings stored in it, the
settings are displayed.
–
If there are more stored send settings than are currently
displayed, you can scroll through the list by pressing [▼] or [▲].
If you select a key without settings:
●
–
A screen appears, asking for your confirmation to store the
settings.
–
Press [Yes].
–
To cancel storing the settings, press [No].
–
The message <Stored in memory.> appears for approximately
two seconds on the touch panel display.
–
The stored settings are displayed.
If you select a key that already has settings stored in it:
●
–
A screen appears, asking for your confirmation to overwrite the
previous settings.
–
Press [Yes].
–
To cancel overwriting the settings, press [No].
–
The message <Stored in memory.> appears for approximately
two seconds on the touch panel display.
–
The stored settings are displayed.
6.
Press [Name].
TOP
Next
4-60