Before Using the
Machine
1
Common Settings
Original and Paper
Error Display for Dirty Feeder
2
Copying
3
Data Compress. Ratio for Remote Scans
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
Gamma Value for Remote Scans
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Initialize Common Settings
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Sets whether to display the error message when the feeder is dirty.
–
On
–
Off
Sets the compression ratio for network scanning. A high compression ratio reduces the amount
of memory used for scanning the document, but results in a lower image quality. On the
contrary, a low compression ratio increases the amount of memory used for scanning the
document, but results in a higher image quality.
–
High Ratio
–
Normal
–
Low Ratio
Sets the gamma value that is used for scanning color documents into your computer through
the Network Scan function. Select a gamma value that is most suited to your computer settings
so that you can print the document from your computer with the most optimal density.
–
Gamma 1.0
–
Gamma 1.4
–
Gamma 1.8
–
Gamma 2.2
Restore all of the Common Settings to their defaults (initial settings) exept for Language Switch.
–
Yes
–
No
Back
Previous
Next
TOP
11-8