Before Using the
Machine
1
Replacing the Stamp Cartridge
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Originals can be stamped to indicate that they have been sent.
Replace the stamp cartridge when this mark is faint or no
longer visible.
When replacing the stamp cartridge, take care not to allow ink to come in
contact with your hands or clothing. If ink gets onto your hands or clothing,
wash it off immediately with cold water.
1.
Open the feeder cover, then open the inner
cover (B) by holding its front tab for removing
the old stamp cartridge (A).
Back
Previous
2.
Remove the old stamp cartridge using the
tweezers.
Widen the tweezers if necessary.
TOP
Next
9-10