Canon imageCLASS MF7460 Reference Manual page 183

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Paper Drawer Selection
You can set how the machine prints documents when there is no
paper matching the size of the received document.
There are four printing methods (Switches A, B, C, and D):
• Switch A:
The image is printed over two sheets of paper that have the same
combined size as the received document.
• Switch B:
The image is printed with blank space on paper that has the same
width as the received document.
Back Previous
• Switch C:
The image is reduced and printed on paper that differs in width
from the received document.
• Switch D:
The image is printed on paper that is larger in size than the received
document.
1.
Press (Additional Functions).
2.
Press [Communications Settings] → [RX
Settings] under <Common Settings> → [Select
Cassette].
The Select Cassette screen appears.
3.
Select [On] or [Off] for the respective switches,
then press [OK].
TOP
Next
4-72