Before Using the
Machine
1
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
2.
Enter <Canon>.
To enter uppercase letters, press [Shift].
To enter a space, press [Space].
To move the cursor, press [◀] or [▶].
To enter symbols, press [Entry Mode] to select [Other], then enter the
desired symbols.
–
If you make a mistake when entering characters, press [◀] or [▶]
to position the cursor on the right side of the characters to be
deleted, then press [Backspace] to delete the characters and
enter the correct characters.
–
To delete all of the characters you have entered, press
–
The available entry modes, and the maximum number of
characters that you can enter vary, depending on the type of
entries you are making.
3.
Press [OK].
Symbols
Example: Enter <é>.
1.
Press [Entry Mode] to select [Other].
2.
Press [▼] or [▲] to display the desired symbol
that you want to enter.
3.
Press [é].
To enter a space, press [Space].
To move the cursor, press [◀] or [▶].
To enter alphanumeric characters, press [Entry Mode] to select
[Alphabet], then enter the desired characters.
–
If you make a mistake when entering characters, press [◀] or [▶]
to position the cursor on the right side of the characters to be
deleted, then press [Backspace] to delete the characters and
enter the correct characters.
–
To delete all of the characters you have entered, press
(Clear).
–
The available entry modes, and the maximum number of
characters that you can enter vary, depending on the type of
entries you are making.
4.
Press [OK].
Back
Previous
Next
(Clear).
TOP
1-12