Canon imageCLASS MF7460 Reference Manual page 411

Before Using the
Machine 1
System Settings
Original and Paper
2
System Manager Settings
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Device Info Settings
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
Department ID Management
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Setting Item
System Manager
System Manager ID
System Password
Device Name
Location
Off
On
Register ID/Password
Register
Turn Limits On/Off and Set Page Limits
Edit
Turn Limits On/Off and Set Page Limits
Erase
Page Totals
Clear
Clear All Totals
Print List
Sets the system manager information to protect the contents of System Settings. Once the
system manager ID and system password is set, they must be entered every time you access the
System Settings menu.
Sets the system manager name (max. 32 characters, including spaces).
Sets the system manager ID (seven digits).
Sets the system manager password (seven digits).
Sets device information.
Registers the machine name (max. 32 characters, including spaces).
Registers the machine location (max. 32 characters, including spaces).
Sets if the department ID management is used.
Does not use the department ID management.
Uses the department ID management.
Sets up or modifies Department ID information.
Registers new Department IDs and passwords.
Sets page limits for scan, prints, and copies from 0 to 999,999 pages.
Changes registered passwords and page limits.
Changes page limits for scan, prints, and copies from 0 to 999,999 pages.
Erases registered Department IDs and passwords.
Displays, clears, and prints counter information.
Clears the counter information for selected departments.
Clears the counter information for all departments.
Prints a list of counter information.
Back Previous Next
Description
TOP
11-28