Canon imageCLASS MF7460 Reference Manual page 104

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
6.
Select the key containing the copy settings that
you want to erase , then press [Next].
– Make sure to check the settings first before erasing them.
– Keys that already have settings stored in them are displayed with
a black square (■) in the lower right corner of the key.
– If you select a key that already has settings stored in it, the
settings are displayed.
– If there are more stored copy settings than are currently
displayed, you can scroll through the list by pressing [▼] or [▲].
7.
Press [Yes].
The message <Erased.> appears for approximately two seconds on
the touch panel display.
The stored copy settings are erased.
To cancel erasing the settings, press [No].
Key names are not erased. For instructions on changing a key name,
see "Naming a Memory Key, " on p. 3-31.
8.
Press [Cancel].
9.
Press [Done].
When a memory key is not in use, as is the case when you delete its
settings, [OK] is grayed out, and you must press [Cancel] → [Done] to
complete the procedure.
Back Previous Next
TOP
3-33