Canon imageCLASS MF7460 Reference Manual page 395

Before Using the
Machine 1
Communications Settings
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
1
* Indicates the item that appear only for the imageCLASS MF7480.
Table of Contents
Index
Gamma Value for Color Send Jobs*
Sharpness
Register Favorites Button
Color TX Scan Settings* 1
Default Screen for Send
Initialize TX Settings
RX Settings
2-Sided Print
1 Sets the gamma value for color scanned data. If the set value corresponds to the gamma value
at the recipient's machine, the scan exposure of the output data at the recipient's machine is
automatically adjusted to the level best suited to the quality of the original. (Gamma 1.8,
Gamma 2.2, Gamma 1.0, Gamma 1.4)
Sets the contrast of the images you scan. (1-7)
Stores destinations with it send settings in favorites buttons.
Sets the priority for color scanned data. Selecting Speed Priority reduces the time spent in
sending the document, but results in low quality images. Conversely, selecting Image Priority
increases the time spent in sending the document, but results in high quality images.
– Speed Priority
– Image Priority
Sets whether the [Favorites], [One-touch] tab, or the Send Basic Features screen is displayed
when the power is turned on,
– Favorites Buttons
– One-touch Buttons
– Initial Function
Restores the TX Settings to their default settings. However, Retry Times, Unit Name, and TX
Terminal ID settings are not initialized.
Sets the reception features.
Sets whether the machine prints received documents on both sides of the paper. (See "Two-
Sided Printing, " on p. 4-71.)
– Off
– On
Back Previous
(Reset) is pressed, or the Auto Clear mode is activated.
TOP
Next
11-12