Canon imageCLASS MF7460 Reference Manual page 414

Before Using the
Machine 1
System Settings
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
IPv6 Settings
Use IPv6
Stateless Address Settings
Manual Address Settings
Off
On
Manual Address
Prefix Length
Default Router Addr.
Use DHCPv6
PING Command
IPv6 Address
Host Name
IP Address Range Settings
Off
On
Sets IPv6 Address settings.
Sets the use of IPv6 address.
– Off
– On
Sets the machine to obtain the IPv6 address automatically using the machine's MAC address
and the prefix (information indicating the network belonged to) included in the RA (Router
Advertisement) notified by the router when the machine is started.
– Off
– On
Sets whether to set a fixed IPv6 address to the machine.
A fixed IPv6 address is not set.
Sets a fixed IPv6 address to the machine.
Registers a fixed IPv6 address to the machine.
Sets the prefix length of the IPv6 address. (0-128)
Sets the default router address.
Sets whether to use DHCPv6.
– Off
– On
Checks the TCP/IPv6 network connection.
Checks the network connection by specifying the IPv6 address.
Checks the network connection by specifying the host name.
Sets whether to use the IP address filter function.
Disables the IP address filter.
Enables the IP address filter.
Back Previous Next
TOP
11-31