Canon imageCLASS MF7460 Reference Manual page 177

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
8.
Set the forwarding conditions.
If your machine is the imageCLASS MF7480 and [Fax]
●
is selected as the receive type, or if your machine is
imageCLASS MF7470/MF7460:
– Press the Fax Number drop-down list, then select the forwarding
condition.
[disregarded]: Disregards the Fax Number information as a
forwarding condition.
[does not exist]: Forwards the document if the Fax Number
information does not exist.
[equals]: Forwards the document if the Fax Number information
matches all of the characters entered.
[differs from]: Forwards the document if the Fax Number
information differs from the characters entered.
[begins with]: Forwards the document if the Fax Number
information begins with the characters entered.
[ends with]: Forwards the document if the Fax Number
information ends with the characters entered.
[contains]: Forwards the document if the Fax Number
information contains the characters entered.
[does not contain]: Forwards the document if the Fax Number
information does not contain the characters entered.
– Enter the forwarding criterion (up to 20 characters) using
– (numeric keys), then press [OK]
[Space]: Press to insert a space between numbers.
[+]: Use to insert a country code. Press [+] after the country code,
and before the fax number.
[◀] [▶]: Press to move the position of the cursor.
[Backspace]: Press to delete the last number entered.
The forwarding conditions are set, and the display returns to the
Register screen.
Back Previous
– If you want to change the criterion for the forwarding conditions
without changing the forwarding condition for the Fax Number
drop-down list, press (Clear), enter the new criterion, then
press [OK].
– The characters that can be entered are: 0 to 9, [Space], [+].
– If [disregarded] or [does not exist] is selected as the forwarding
condition, you cannot enter any criteria.
If your machine is the imageCLASS MF7480 and [I-Fax]
●
is selected as the receive type:
– Press the Destination, From, or Subject drop-down list.
[disregarded]: Disregards the Destination, From, or Subject
information as forwarding conditions.
[equals]: Forwards the document if the From or Subject
information matches all of the characters entered.
[differs from]: Forwards the document if the Destination, From, or
Subject information differs from the characters entered.
[begins with]: Forwards the document if the Destination, From,
or Subject information begins with the characters entered.
[ends with]: Forwards the document if the Destination, From, or
Subject information ends with the characters entered.
[contains]: Forwards the document if the Destination, From, or
Subject information contains the characters entered.
[does not contain]: Forwards the document if the Destination,
From, or Subject information does not contain the characters
entered.
– Select the forwarding condition, then press [Set.].
– Enter the forwarding criteria (up to 120 characters for the
Destination, and 128 characters for the From or Subject), then
press [OK].
TOP
Next
4-66