Canon imageCLASS MF7460 Reference Manual page 238

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
PASV mode for FTP Setting
Whether you use the PASV mode for FTP depends on the network
environment you are using and the settings of the file server you are
sending to. Before specifying the PASV mode for FTP, consult your network
administrator.
1.
Press (Additional Functions).
2.
Press [System Settings] → [Network Settings] →
[TCP/IP Settings] → [▼] → [Use PASV Mode for
FTP].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
keys), then press (Log In/Out) to enter the System Settings menu.
The Use PASV Mode for FTP screen appears.
3.
Select [On] or [Off].
4.
Press [OK].
5.
Press [Done] repeatedly until the Additional
Functions screen closes.
6.
Restart the machine.
Turn off the machine, wait at least 10 seconds, then turn it on.
FTP Extension Settings
If you are sending to an imageWARE Document Manager folder, set the FTP
server address specified in imageWARE Gateway as the destination. Set
[FTP Extension] to [ON]. Using imageWARE Document Manager and the
Send function of the machine enables you to manage digitized paper
documents and computer data on the network. For more information on
imageWARE Document Manager, see the appropriate imageWARE Gateway
documentation.
1.
Press
2.
Press [System Settings] → [Network Settings] →
[TCP/IP Settings] → [▼] → [▼] → [FTP Extension].
– (numeric
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
keys), then press
The FTP Extension screen appears.
3.
Select [On] or [Off].
4.
Press [OK].
5.
Press [Done] repeatedly until the Additional
Functions screen closes.
6.
Restart the machine.
Turn off the machine, wait at least 10 seconds, then turn it on.
Back Previous Next
(Additional Functions).
(Log In/Out) to enter the System Settings menu.
TOP
– (numeric
6-37