System Settings; Maintenance 9; Printing And Scanning 5; Machine 1 - Canon imageCLASS MF7460 Reference Manual

Imageclass mf7400 series
Hide thumbs Also See for imageCLASS MF7460:
Table of Contents

Advertisement

Before Using the
Machine
1
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7

System Settings

8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
3.
Select the destination to be erased, then press
[Erase].
You cannot erase multiple destinations at the same time.
Press the alphanumeric keys (e.g., [ABC]) to display the individual
keys for each letter or number. You can select a letter or number
to restrict the displayed range of entries. Press [All] to return to
the full address list.
If the desired destination is not displayed, press [▼] or [▲] to
scroll to the desired destination.
You can restrict the type of destinations displayed in the results
list by pressing the Type drop-down list.
You can select a destination and press [Details] to confirm the
detailed information related to the selected destinations. Press
[Done] to return to the previous screen.
If you select [All] in the Address Book drop-down list, the
destinations stored in the one-touch buttons are displayed.
However, you cannot erase these destinations. For instructions
on erasing one-touch buttons, see "Erasing One-Touch Buttons, "
on p. 4-59.
4.
Press [Yes].
To cancel erasing, press [No].
The message <Erased.> appears for approximately two seconds on
the touch panel display.
5.
Press [Done] repeatedly until the Send Basic
Features screen appears.
Back
Previous
Erasing One-Touch Buttons
1.
Press
(Additional Functions).
2.
Press [Address Book Settings] → [One-touch
Buttons].
If a password has been set for the Address Book, enter the password
using
(numeric keys), then press [OK] to enter the Address
Book Settings menu. (See "Setting a Password for the Address Book, "
on p. 8-16.)
The Register One-touch Button screen appears.
3.
Select a one-touch button containing the
destination(s) you want to erase, then press
[Erase].
If the desired one-touch button is not displayed, press [▼] or [▲]
to scroll to the desired one-touch button.
You can also specify the one-touch button's number by entering
the three digit number of the desired one-touch button using
(numeric keys).
Make sure that you verify the settings first before you erase them.
One-touch buttons that already have destinations stored in them
are displayed with a black square (■) in the lower right corner of
the key.
If you select a one-touch button that already has destinations
stored in it, the destinations are displayed.
If you register multiple destinations as a group address in a one-
touch button, the number of destinations registered in the group
address is displayed.
4.
Press [Yes].
To cancel erasing, press [No].
The message <Erased.> appears for approximately two seconds on
the touch panel display.
TOP
Next
4-59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageclass mf7480Imageclass mf7470

Table of Contents