Before Using the
Machine
1
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
5.
Remove any jammed paper that is protruding
from the lower part of the fixing unit.
The parts inside the fixing unit are subject to high-temperatures.
When removing jammed paper, take care not to touch anything in
this area, except the upper cover.
6.
Push up the green fixing lever.
Back
Previous
7.
Place your hand where the hand symbol ( ) is
located on the left cover of the main unit, and
then gently close the left cover until it clicks into
place in the closed position.
Be careful not to get your fingers caught.
8.
Follow the instructions on the touch panel
display.
The screen indicating the location of the paper jam repeatedly
appears on the touch panel display until the paper jam is entirely
cleared. For more information, see "Clearing Jams, " on p. 10-3.
TOP
Next
10-10