Printing Received Documents; Sided - Canon imageCLASS MF7460 Reference Manual

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Handling Documents with Forwarding Errors
You can set how the machine handles the documents that failed to
be forwarded.
– If a forwarding error occurs when all of Print Image, Store Image to
Memory, and Memory Lock are all set to [Off ], the received documents
will be lost.
– If Memory Lock is set to [On], forwarding error jobs are not printed even
if Print Image is set to [On]. It is printed when Memory Lock is set to [Off ].
1.
Press (Additional Functions).
2.
Press [System Settings] → [▼] → [Failed
Forwarding Document Set.].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
keys), then press (Log In/Out) to enter the System Settings menu.
The Failed Forwarding Document Set. screen appears.
3.
Press [Print Image].
4.
Select [On] or [Off], then press [OK].
[On]: Prints out the image if forwarding fails.
[Off ]: Does not print the image.
5.
Press [Store Image to Memory].
6.
Select [On] or [Off], then press [OK].
[On]: Stores the image in memory if forwarding fails.
[Off ]: Does not store the image.
If you set Store Image to Memory to [On], you can redirect the jobs
with forwarding errors to registered destinations in the Address Book
or one-touch buttons from the I-FAX Forwarding Error Status screen
or Fax Forwarding Error Status screen. (See "Checking/Changing the
Status of Fax Jobs with Forwarding Errors, " on p. 4-78, and "Checking/
Changing the Status of I-Fax Jobs with Forwarding Errors, " on p. 4-82.)
7.
Press [Done] repeatedly until the Send Basic
Features screen appears.

Printing Received Documents

■
– (numeric
The machine provides the following printing features: two-sided
printing and received image reduction.
Two-Sided Printing
You can print received documents on both sides of the paper.
1.
Press
2.
Press [Communications Settings] → [RX
Settings] under <Common Settings> → [2-Sided
Print].
The 2-Sided Print screen appears.
3.
Select [On] or [Off], then press [OK].
4.
Press [Done] repeatedly until the Send Basic
Features screen appears.
Back Previous Next
(Additional Functions).
TOP
4-71