Canon imageCLASS MF7460 Reference Manual page 264

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Set ID and Password: Sets the System Manager ID and
Password to protect the contents
of <System Settings>. Once the
System Manager ID and Password
is set, they must be entered when
you access the <System Settings>
menu from the control panel, or
when you logon the Remote UI.
System Manager ID: Sets the System Manager ID (seven
digits maximum).
Set Password: Select this check box to set a
password for the System Manager
ID.
System Manager Enter a number (seven digits
Password: maximum).
Confirm: Enter the password again. If the
number you enter here is different
from the number entered for
[System Manager Password], an
error dialog box appears.
Permit End-user's Job Select this check box to permit
Operation: deleting print jobs for which you
have owner privileges when the
machine is in the End-User Mode.
Back Previous Next
TOP
7-15