Canon imageCLASS MF7460 Reference Manual page 120

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
12.
Press [Reply-to].
13.
Select the reply-to address, then press [OK].
– You need to store reply-to addresses in the Address Book
beforehand. (See "Storing/Editing Address Book, " on p. 4-44.)
– If the desired reply-to address is not displayed, press [▼] or [▲]
to scroll to the desired reply-to address.
– Press the alphanumeric keys (e.g., [ABC]) to display the individual
keys for each letter or number. You can select a letter or number
to restrict the displayed range of entries. Press [All] to return to
the full address list.
– You can also specify a fax number as the reply-to address.
– You cannot select multiple destinations at the same time.
– To cancel a selected reply-to address, press [Reply-to], then
[Cancel].
– To view the detailed information of a selected reply-to address,
select the address, then press [Details].
14.
Press [Done].
15.
Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display, then press
each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning
is complete.
Sending a Job to a File Server
■
(imageCLASS MF7480 Only)
You can send a job to any computer that acts as a file server on the
network. You can add the document's name and message body
text. The scanned document can be sent as a JPEG, TIFF, or PDF file.
1.
Press
2.
Place your originals.
3.
Specify the file server's address.
4.
Press [Send Settings].
5.
Press [Document Name].
(Start) once for
Back Previous Next
(SEND).
TOP
4-9