5.13 Performing Final Steps
1. Remove plastic covering from cab display module (CDM), and seats after predelivery checks are complete.
2. Locate bag inside the cab containing the GPS mount kit, and install kit in accordance with the instructions in the
kit. If not installing kit, label bag (GPS Completion kit) and place kit in toolbox for safekeeping.
3. Remove decal (MD #166705) from windshield only
AFTER machine is delivered to the end user.
214298
PERFORMING PREDELIVERY CHECKS
239
Figure 5.31: Windshield Decal (MD #166705)
Revision A