Table of Contents
Advertisement
3EM13853AF
Issue 01, September 2007
Did output return a COMPLD or DENY?
100
INHMSG-PM
INHMSG-PM indicates facility PM reports are inhibited.
101
Are PM report to be allowed?
Enter
102
where:
x=facility type (ALL, COM, EC1, GIGE, OC3, OC12, OC48, OC192, OFA, STS1,
STS3C, STS12C, STS48C, T1, T3, VT1)
AID=Facility Access Identifier
Go to step 161.
103
IPCPLCONFAIL or IPCPLDCF
IPCPLCONFAIL indicates line IPCP DCC connection failure. IPCPLDCF indicates
104
IPCP Line DCC connection failure and is raised after MAXTERM count exhausted or
reception of code reject.
Go to step 160.
IPCPSCONFAIL or IPCPSDCF
IPCPSCONFAIL indicates Section IPCP DCC connection failure. IPCPSDCF
105
indicates IPCP Section DCC connection failure and is raised after MAXTERM count
exhausted or reception of code reject.
Go to step 160.
ISD
ISD indicates system is receiving and detecting an idle signal on a stand-alone or
106
embedded DS3.
Problem is outside system. Go to step 160.
Facility Alarm or Event
If COMPLD, go to step 161.
If DENY, go to step 160.
If yes, go to step 102.
If no, go to step 161.
ALW-PMREPT-x::AID;
TAP-100
4-15
Advertisement
Table of Contents
