Alcatel-Lucent 1677 SONET Maintenance And Trouble Clearing page 45

3EM13853AF
Issue 01, September 2007
CONDITION DEFINITION
FPSWUNLCK Front panel switch is unlocked CCC, SSC, TC
FRCDWKSWBK Forced switch to working.
Applies to protection facility.
Applies to the protection OC-n
facility.
FRCDWKSWBK Forced switch to working.
Applies to UPSR facilities.
FRCDWKSWPR Forced switch to protection.
Applies to working DS3, ECC,
TMUX, and VSC.
FRCDWKSWPR Forced switch to working.
Applies to UPSR facilities.
FRCDWKSWPR Forced switch to protection.
Applies to working OC-n
facility.
FRCDWKSWPR- Forced switch from working to
RING protection. Applies to BLSR
facilities.
FRD Intrusion is suspected.
FWMISM Firmware mismatch
HLDOVRSYNC Manual or automatic switch to
hold-over synchronization
mode
HLTHVER Health FPGA version is
incompatible with peer card
IDROMREADERR Physical ID ROM could not be
read.
IMPROPINS Improper Insertion - Timing
card is not compatible with
existing one.
IMPROPRMVL Card physical removal was not
preceded by logical removal
INHMSG-PM PM reports inhibited
INHMSG-PM PM reports inhibited for all
entities
INHSWPR Switching from working card to
protection is inhibited
Alarm and Event Condition Clearing Procedures
Table 101-A. Condition Types (cont.)
EQUIPMENT
IOC
CHASSIS
(transient
CCC, SSC, IOC
(TMUX)
TC-SYNC
IOC, SSC, CCC
CCC, SSC, TC,
DISK, IOC, MOS
TC
All cards
CHASSIS
DS3, ECC,
TMUX, VSC
FACILITY
OC-3, OC-12,
OC-48, OC-192
STS1, STS3C,
STS12C, STS48C
STS1, STS3C,
STS12C, STS48C
OC-3, OC-12,
OC-48, OC-192
OC-48, OC-192
1
)
All facilities
IXL-101
REF
TAP-108
TAP-100
No
action
TAP-117
No
action
TAP-100
TAP-100
No
action
TAP-127
TAP-118
TAP-142
TAP-144
TAP-143
TAP-123
TAP-129
TAP-129
TAP-130
2-9