3EM13853AF
Issue 01, September 2007
Figure 131-2. Connect ESD Wrist Strap to Grounding Jack
ESD
WRIST STRAP
Loosen top and bottom thumbscrews.
13
Lift up on top and bottom ejectors.
14
Carefully slide card out of shelf and place in antistatic packaging.
15
Remove the replacement card from its antistatic packaging.
16
Extend both ejector handles.
17
Make sure safety key switch is in
18
Align the card with the slot guides and push in the card until both card ejectors engage
19
the tabs at the edge of the slot. See figure 131-3.
Replace EDFA Card
ESD
GROUNDING JACK
position.
OFF
DLP-131
677-0106-1
090804
5-49