Table of Contents
Advertisement
DLP-128
Observe output. MAN alarms are set against disks in CCC just installed until they are
64
activated.
Enter
65
where: AID=Access Identifier of CCC just replaced.
Did output return COMPLD or DENY?
66
Enter
67
where: AID=Access Identifier of TC just replaced.
Did output return COMPLD or DENY?
68
Installing replacement CCC causes a CONTR alarm. Check for CONTR alarm. Enter
69
RTRV-ALM-ALL;
Observe output. A CONTR alarm should be declared against CCC that was just
70
installed. Repeat step
10 minutes, go to step 109.
Wait five minutes after CONTR alarm clears before continuing.
71
Enter
72
where: AID=Access Identifier of CCC just replaced.
Does PST=IS and SST=STBYH?
73
Enter
74
where: AID=Access Identifier of TC just restored.
Does PST=IS and SST=STBYH?
75
5-34
for CCC just replaced.
RST-EQPT::AID;
If COMPLD, go to step 67.
If DENY, go to step 109.
for OOS-MA TC.
RST-EQPT::AID;
If COMPLD, go to step 69.
If DENY, go to step 109.
and
RTRV-COND-ALL;
70
until CONTR alarm clears. If alarm does not clear within
RTRV-EQPT::AID;
If yes, go to step 74.
If no, go to step 109.
RTRV-EQPT::AID;
If yes, go to step 76.
If no, go to step 109.
Issue 01, September 2007
Replace Common Control Card (CCC)
3EM13853AF
Advertisement
Table of Contents
