DLP-144
Enter
7
where:
AID=Access Identifier of mate TMUX.
Observe output. Note state of mate TMUX.
8
Is state of mate TMUX card IS?
9
Is TMUX card to be replaced a working or protect card? Refer to table 144-A.
10
Enter
11
where:
AID=Access Identifier of TMUX to be replaced.
Did output return COMPLD or DENY?
12
Enter
13
where:
AID=Access Identifier of TMUX to be replaced.
Did output return COMPLD or DENY?
14
Enter
15
where:
AID=Access Identifier of TMUX to be replaced.
Did output return COMPLD or DENY?
16
Remove and replace TMUX card. Refer to DLP-101.
17
5-96
to check state of mate TMUX card
RTRV-EQPT::AID;
If yes, go to step 10.
If no, go to step 25.
If working, go to step 11.
If protect, go to step 13.
INH-SWTOWKG-EQPT::AID;
If COMPLD, go to step 15.
If DENY, go to step 25.
INH-SWTOPROTN-EQPT::AID;
If COMPLD, go to step 15.
If DENY, go to step 25.
to remove TMUX.
RMV-EQPT::AID;
If COMPLD, go to step 17.
If DENY, go to step 25.
to switch traffic to protect.
to switch traffic to working.
3EM13853AF
Issue 01, September 2007
Replace Transmux Card (TMUX)