Table of Contents
Advertisement
3EM13853AF
Issue 01, September 2007
Enter
75
where:
AID=Access Identifier of the "A" disk in standby CCC (DISK-{A9, A10}).
Enter
76
where:
AID=Access Identifier of the "B" disk in standby CCC (DISK-{B9, B10}).
Observe output. Note state of disks.
77
Does output indicate that disks in standby CCC are present (PST=OOS-MA)?
78
Enter
79
ACT-DISK::AID::::ACTION=MOUNT;
where:
AID=Access Identifier of the "A" disk in the standby CCC
Did output return COMPLD or DENY?
80
Enter
81
ACT-DISK::AID::::ACTION=MOUNT;
where:
AID=Access Identifier of the "B" disk in the standby CCC
Did output return COMPLD or DENY?
82
Enter
83
Standby CCC.
where:
AID=Access Identifier of the "A" disk in the standby CCC
Did output return COMPLD or DENY?
84
Replace Timing Card (TC)
RTRV-DISK::AID;
RTRV-DISK::AID;
If yes, go to step 79.
If no, go to step 83.
If COMPLD, go to step 81.
If DENY, go to step 94.
If COMPLD, go to step 83.
If DENY, go to step 94.
ACT-DISK::AID::::MODE=SEC,ACTION=ACTIVATE;
If COMPLD, go to step 87.
If DENY, go to step 94.
to mount disk just inserted.
to mount disk just inserted.
to activate disk "A" in the
DLP-137
5-81
Advertisement
Table of Contents
