Table of Contents
Advertisement
DLP-147
Release loopbacks on DS3 card to be replaced. Refer to Operation and Administration
20
manual (PN 3EM13851AF).
Release test connections on DS3 card to be replaced. Refer to Operation and
21
Administration manual (PN 3EM13851AF).
Removal and Replacement of the DS3 Card
Enter
22
where:
AID=Equipment Access Identifier of the DS3 card to be replaced.
Did output return COMPLD or DENY?
23
Remove DS3 card. Refer to DLP-101.
24
Enter
25
where:
AID=Equipment Access Identifier of the ECC module to be inserted.
Did output return COMPLD or DENY?
26
Insert ECC module. Refer to DLP-101.
27
Enter
28
where:
AID=Equipment Access Identifier of the ECC module just inserted.
Did output return COMPLD or DENY?
29
Enter
30
where:
AID=Equipment Access Identifier of the ECC module just inserted.
Observe output.
31
5-108
for DS3 card being replaced.
RMV-EQPT::AID;
If COMPLD, go to step 24.
If DENY, go to step 42.
ED-EQPT::AID:::ECC-12P;
If COMPLD, go to step 27.
If DENY, go to step 42.
RST-EQPT::AID:::ECC-12P;
If COMPLD, go to step 30.
If DENY, go to step 42.
to verify state of ECC module.
RTRV-EQPT::AID;
for replacement ECC module.
for replacement ECC module.
Issue 01, September 2007
Replace DS3 Card with an ECC Card
3EM13853AF
Advertisement
Table of Contents
