Table of Contents
Advertisement
3EM13853AF
Issue 01, September 2007
Enter
46
where:
x=A or B (slot number of TC associated with CCC to be replaced)
Did output return COMPLD or DENY?
47
Open latch on STBY, OOS-MA TC. Refer to
48
Remove CCC. Refer to DLP-101.
49
Before inserting new CCC, use a CCC interface cable to connect laptop or VDT to
50
DIAG port on CCC. See figure 128-1.
Replace Common Control Card (CCC)
RMV-EQPT::TC-11-x;
If COMPLD, go to step 48.
If DENY, go to step 109.
DLP-101
steps
19
through 24.
DLP-128
5-31
Advertisement
Table of Contents
