Table of Contents
Advertisement
DLP-137
TC TO BE REPLACED
TC-11-A
TC-11-B
Enter
8
Observe output. Note state of disks.
9
Are disks in both CCCs in a valid state (One Disk A is IS,WRK, one Disk A is
10
IS,STBYH, one Disk B is IS,WRK, and one Disk B is IS,STBYH)?
Enter
11
ACT-DISK::AID::::ACTION=DEACTIVATE;
to TC to be replaced.
where:
AID=Access Identifier of disk corresponding to TC to be replaced (DISK-{A9, A10}).
Enter
12
ACT-DISK::AID::::ACTION=DEACTIVATE;
to TC to be replaced.
where:
AID=Access Identifier of disk corresponding to TC to be replaced (DISK-{B9, B10}).
Enter
13
Observe output. Note Primary State (PST) of disks that were deactivated.
14
Are PSTs of disks that were deactivated OOS-MA? Refer to table 137-A.
15
Is state of disks corresponding to TC not being replaced IS,WRK? Refer to table 137-A.
16
Enter
17
ACT-DISK::AID::::ACTION=UNMOUNT;
TC to be replaced.
where:
AID=Access Identifier of disk corresponding to TC to be replaced (DISK-{A9, A10}).
5-76
Table 137-A. TC/Disk Relationship
DISKS TO BE DEACTIVATED (DISK AID)
DISK-A9, DISK-B9
DISK-A10, DISK-B10
to check state of all disks.
RTRV-DISK;
If yes, go to step 11.
If no, go to step 94.
RTRV-DISK;
If yes, go to step 16.
If no, go to step 94.
If yes, go to step 17.
If no, go to step 94.
Issue 01, September 2007
to deactivate the "A" disk corresponding
to deactivate the "B" disk corresponding
to unmount the "A" disk corresponding to
Replace Timing Card (TC)
3EM13853AF
Advertisement
Table of Contents
