Table of Contents
Advertisement
3EM13853AF
Issue 01, September 2007
XMTLPBK
XMTLPBK indicates far end DS1 or DS3 port loopback is active.
157
Does loopback need to be released?
Enter
158
where:
x=Facility type (T1 or T3)
AID=Facility Access Identifier
Other parameters are optional. If a value is not entered for these parameters, the
system will use the default value. Refer to Commands and Messages manual
(PN 3EM13852AF) for details on parameter values.
Did output return COMPLD or DENY?
159
Contact next level of technical support for assistance.
160
161
STOP. This procedure is complete.
Facility Alarm or Event
If yes, go to step 158.
If no, go to step 161.
RLS-LPBK-x::AID:::[LOCN],,,[LPBKTYPE];
If COMPLD, go to step 161.
If DENY, go to step 160.
TAP-100
4-23
Advertisement
Table of Contents
