Table of Contents
Advertisement
DLP-146
Enter
3
where:
AID=Equipment Access Identifier of ECC to be replaced
Observe output.
4
Is ECC card to be replaced a protect module (located in slots IOC-1-A, IOC-1-B,
5
IOC-17-A, or IOC-17-B)?
Is state of protect module IS, WRK?
6
Enter
7
where:
AID=Equipment Access Identifier of the ECC protection card to be replaced.
Go to step 18.
8
Is state of ECC IS,WRK?
9
Enter
10
where:
AID=Equipment Access Identifier of the ECC card to be replaced.
Go to step 18.
11
Enter
12
being replaced.
where:
AID=Equipment Access Identifier of the protect ECC in group.
Is the state of protect card IS,STBYH?
13
5-102
for ECC being replaced.
RTRV-EQPT::AID;
If yes, go to step 6.
If no, go to step 9.
If yes, go to step 33.
If no, go to step 7.
INH-SWTOPROTN-EQPT::AID;
If yes, go to step 12.
If no, go to step 10.
INH-SWTOWKG-EQPT::AID;
to check the state of protection ECC in group where ECC is
RTRV-EQPT::AID;
If yes, go to step 14.
If no, go to step 33.
to inhibit switching to protection.
to inhibit switching to working.
Replace ECC Card with an ECC Card
3EM13853AF
Issue 01, September 2007
Advertisement
Table of Contents
