Table of Contents
Advertisement
3EM13853AF
Issue 01, September 2007
Enter
10
where:
AID=Equipment Access Identifier of the DS3 protection card to be replaced.
Did output return COMPLD or DENY?
11
Is state of DS3 IS,WRK?
12
Enter
13
where:
AID=Equipment Access Identifier of the DS3 card to be replaced.
Did output return COMPLD or DENY?
14
Enter
15
being replaced.
where:
AID=Equipment Access Identifier of the protect ECC in group.
Observe output.
16
Is the state of protect card IS,STBYH?
17
Enter
18
where:
AID=Equipment Access Identifier of the DS3 card to be replaced.
Did output return COMPLD or DENY?
19
Replace DS3 Card with an ECC Card
INH-SWTOPROTN-EQPT::AID;
If COMPLD, go to step 20.
If DENY, go to step 42.
If yes, go to step 15.
If no, go to step 13.
INH-SWTOWKG-EQPT::AID;
If COMPLD, go to step 20.
If DENY, go to step 42.
to check the state of protection ECC in group where DS3 is
RTRV-EQPT::AID;
If yes, go to step 18.
If no, go to step 42.
INH-SWTOWKG-EQPT::AID;
If COMPLD, go to step 20.
If DENY, go to step 42.
to inhibit switching to protection.
to inhibit switching to working.
to inhibit switching to working.
DLP-147
5-107
Advertisement
Table of Contents
