Alcatel-Lucent 1677 SONET Maintenance And Trouble Clearing page 77

3EM13853AF
Issue 01, September 2007
Enter
59
where:
OCn=Optical facility (OC-48 or OC-192)
AID=West OC-n facility access identifier
Enter
60
where:
OCn=Optical facility (OC-48 or OC-192)
AID=East OC-n facility access identifier
Enter
61
where:
OCn=Optical facility type (OC-48 or OC-192)
AID=OC-48/OC192 access identifier
Enter
62
Did APSCNMIS condition clear?
63
BLSRAD-AUTO
BLSRAD-AUTO indicates autodiscovery auto mode is set on own node but not on
64
neighbor. Go to step 160.
BLSRAD-DUPNODE
BLSRAD-DUPNODE indicates a duplicate node ID has been detected.
65
Enter
where:
OCn=Optical facility type (OC-48 or OC-192)
AID=OC-48/OC-192 access identifier
Observe output and note current value of NODEID parameter.
66
Enter
67
where:
OCn=Optical facility (OC-48 or OC-192)
AID=East OC-n facility access identifier
Facility Alarm or Event
RLS-PROTNSW-OCn::AID;
RLS-PROTNSW-OCn::AID;
RTRV-FFP-OCn::[AID];
and
RTRV-ALM-ALL; RTRV-COND-ALL;
If yes, go to step 161.
If no, go to step 160.
RTRV-FFP-OCn::[AID];
OPR-PROTNSW-OCn::AID:::LOP-S;
to verify new node ID value.
and observe output.
TAP-100
4-9