3EM13853AF
Issue 01, September 2007
DLP-114
Handling Static-Sensitive Devices
PURPOSE
This procedure provides instructions to handle static-sensitive devices.
RECOMMENDED TOOLS
Wrist strap
STEP
PROCEDURE
WARNING: Possibility of equipment damage. Circuit cards contain static-
1
sensitive devices. These devices are susceptible to static discharge damage
when they are not connected to backplane of node. The following procedure
should always be followed when installing or removing cards.
Wear a ground wrist strap.
2
Plug ground wrist strap into grounding jack between Power A and Power B switches.
3
Handle units at front and side edges only. Do not touch circuit traces or components.
4
5
STOP. This procedure is complete.
Handling Static-Sensitive Devices
DLP-114
5-21