Table of Contents
Advertisement
DLP-128
Wait for disk to synchronize.
90
Enter
91
Observe output. Note software release on system and status.
92
Is software release on system the same as it was in step 4?
93
What is status on the system?
94
Enter
95
Enter
96
Observe output. Note FWVER, SWVER, PST, and SST parameters.
97
Is the FWVER and SWVER the same for both CCCs?
98
Is the state of one CCC IS,WRK and the state of the other CCC IS,STBYH?
99
Enter
100
where: AID=Access Identifier of either CCC
Did output return COMPLD or DENY?
101
Enter
102
where: AID=Access Identifier of CCC just replaced
5-36
RTRV-PRMTR-NE;
If yes, go to step 94.
If no, go to step 109.
If COMPLETE, go to step 95.
If IN PROGRESS, go to step 109.
RTRV-EQPT::CCC-9;
RTRV-EQPT::CCC-10;
If yes, go to step 99.
If no, go to step 109.
If yes, go to step 100.
If no, go to step 109.
to switch CCC just replaced to working.
SW-DX-EQPT::AID;
If COMPLD, go to step 102.
If DENY, go to step 109.
RTRV-EQPT::AID;
Issue 01, September 2007
Replace Common Control Card (CCC)
3EM13853AF
Advertisement
Table of Contents
