Table of Contents
Advertisement
DLP-135
For any groups, is ACTIVE facility on the card to be replaced?
28
Enter
29
OPR-PROTNSW-STS1::AID:::MANWKSWPR;
deleted.
where:
AID=Access Identifier of facility to switch
Repeat step
30
Enter
31
where:
AID=Access Identifier of card to be replaced.
Did output return COMPLD or DENY?
32
Remove and replace OC-n line card. Refer to DLP-101.
33
Enter
34
where:
AID=Access Identifier of card just replaced.
Did output return COMPLD or DENY?
35
Was traffic switched off card before it was replaced?
36
Enter
37
where:
x=Facility type (OC3, OC12, OC48, OC192, STS1, STS3C, STS12C, STS48C)
AID=Facility Access Identifier
Repeat step
38
5-68
If yes, go to step 29.
If no, go to step 31.
29
for each protection group to be switched away from card to be deleted.
to remove OC-n card.
RMV-EQPT::AID;
If COMPLD, go to step 33.
If DENY, go to step 39.
to restore OC-n card.
RST-EQPT::AID;
If COMPLD, go to step 36.
If DENY, go to step 39.
If yes, go to step 37.
If no, go to step 40.
RLS-PROTNSW-x::AID;
37
to switch all working traffic back to card just replaced.
Issue 01, September 2007
to switch traffic away from card to be
Replace OC-n Line Card
3EM13853AF
Advertisement
Table of Contents
