Table of Contents
Advertisement
3EM13853AF
Issue 01, September 2007
Enter
14
where:
AID=Equipment Access Identifier of the ECC to be replaced.
Did output return COMPLD or DENY?
15
Enter
16
where:
AID=Equipment Access Identifier of the ECC card to be replaced.
Did output return COMPLD or DENY?
17
Release loopbacks on ECC module to be replaced. Refer to Operation and
18
Administration manual (PN 3EM13851AF).
Release test connections on ECC module to be replaced. Refer to Operation and
19
Administration manual (PN 3EM13851AF).
Enter
20
where:
AID=Equipment Access Identifier of the ECC to be replaced.
Did output return COMPLD or DENY?
21
Remove and replace ECC. Refer to DLP-101.
22
Enter
23
where:
AID=Equipment Access Identifier of the ECC just replaced.
Did output return COMPLD or DENY?
24
Replace ECC Card with an ECC Card
SW-TOPROTN-EQPT::AID;
If COMPLD, go to step 16.
If DENY, go to step 33.
INH-SWTOWKG-EQPT::AID;
If COMPLD, go to step 18.
If DENY, go to step 33.
for ECC being replaced.
RMV-EQPT::AID;
If COMPLD, go to step 22.
If DENY, go to step 33.
for replacement ECC.
RST-EQPT::AID;
If COMPLD, go to step 25.
If DENY, go to step 33.
to switch working ECC to protect.
to inhibit switching to working.
DLP-146
5-103
Advertisement
Table of Contents
