Table of Contents
Advertisement
IXL-101
CONDITION
DEFINITION
INHSWWKG
Switching from protection to
working card is inhibited
INIT
System initialization in
progress
INIT-2
Module is reset.
INT
Unrecognized fan controller
INT-1
No valid oscillator could be
selected
INT-19
Module ID ROM (remote
inventory data) is improperly
programmed.
INT-2
No valid system clock could be
selected
INTERR
Internal error has been
detected for the module.
Applies to DS0G, DS3, ECC,
EDFA, GIGE, OC3, OC12,
OC48, and OC192 modules.
IOC-8K-DF
IOC card detects 8k clock loss
defect. Applies to DS0G, DS3,
EC1, GIGE, OC-3, OC-12,
OC-48, OC-192, TMUX, and
VSC modules.
IOC-INT-DF
IOC card internal defect is
detected on HYPERMAPPER
component. Applies to DS0G,
EC1, GIGE, OC12, OC192,
OC3, OC48, TMUX, and VSC
modules.
IPCPLCONFAIL
IPCP Line DCC connection
failure
IPCPLDCF
IPCP Line DCC connection
failure. Alarm raised after
MAXTERM count exhausted
or reception of Code reject
IPCPSCONFAIL
IPCP Section DCC connection
failure
2-10
Table 101-A. Condition Types (cont.)
EQUIPMENT
DS3, ECC,
TMUX, VSC
CHASSIS
CCC, SSC
(transient
FANTRAY
CHASSIS
IOC
CHASSIS
IOC (transient
IOC (transient
IOC (transient
Issue 01, September 2007
FACILITY
1
)
1
)
1
)
1
)
OC-3, OC-12,
OC-48, OC-192
OC-3, OC-12,
OC-48, OC-192
OC-3, OC-12,
OC-48, OC-192
Alarm and Event Condition Clearing Procedures
3EM13853AF
REF
TAP-131
No
action
No
action
TAP-110
TAP-133
TAP-134
TAP-135
No
action
No
action
TAP-103
TAP-100
TAP-100
TAP-100
Advertisement
Table of Contents
