Alcatel-Lucent 1677 SONET Maintenance And Trouble Clearing page 68

RTL-101
form n-
only if the value of the parameter is 1 or higher;
lower.
TMPER=Accumulation period for the counter: either
TMOFST=Time offset between reporting/diagnostics/exercises.
Go to step 1.
20
Inhibit PM Reporting
Enter
21
where:
x=Facility Type (EC1, GIGE, OC3, OC12, OC48, OC192, OFA, STS1, STS3C, STS12C,
STS48C, T1, T3, VT1).
AID=Access Identifier of the facility.
Go to step 1.
22
Allow PM Reporting
Enter
23
where:
x=Facility Type (EC1, GIGE, OC3, OC12, OC48, OC192, OFA, STS1, STS3C, STS12C,
STS48C, T1, T3, VT1).
AID=Access Identifier of the facility.
Go to step 1.
24
25 STOP. This procedure is complete.
3-8
or n- , where n is an integer in the range 0-255. For example,
UP DN
or
INH-PMREPT-COM;
or
ALW-PMREPT-ALL;
INH-PMREPT-rr::AID;
or
ALW-PMREPT-COM;
Issue 01, September 2007
reports only if the value is 2 or
2-DN
(default) or
15-MIN
ALW-PMREPT-x::AID;
Performance Monitoring
3EM13853AF
reports
1-UP
.
1-DAY