Warnings At Build Start - Stratasys F120 User Manual

Warnings and Errors

Warnings at Build Start

Model material does not match selected job
• The model material currently installed does not match the model material configuration of
the selected job.
• Correct condition - unload incorrect model material and load the correct model material for
the selected job. See
instructions.
Support material does not match selected job
• The support material currently installed does not match the support material configuration
of the selected job.
• Correct condition - unload incorrect support material and load the correct support material
for the selected job. See
for instructions.
Insufficient model material for part build
• The amount of model material currently installed in the printer is not sufficient for the
selected build.
• Correct condition - connect a material coil box to the printer that contains a sufficient
amount of model material. See
Insufficient support material for part build
• The amount of support material currently installed in the printer is not sufficient for the
selected build.
• Correct condition - connect a material coil box to the printer that contains a sufficient amout
of support material. See
Order new model head
• The model head has reached 1350 build hours, and is near its odometer limit. Build hours
are available within the head's Head Details page (see
• Correct condition - you are still able to build using this head, but part quality may be
affected. Once the head's odometer limit is reached, you will be prompted to change the
head (see
Order new support head
• The support head has reached 1350 build hours, and is near its odometer limit. Build hours
are available within the head's Head Details page (see
• Correct condition - you are still able to build using this head, but part quality may be
affected. Once the head's odometer limit is reached, you will be prompted to change the
head (see
Replace model head
• The model head has reached 1500 build hours (odometer limit). Build hours are available
within the head's Head Details page (see
"Unloading Material" (page 105)
"Unloading Material" (page 105)
"Loading Material" (page 97)
"Loading Material" (page 97)
"Head Replacement" (page
"Head Replacement" (page
© Copyright 2020 Stratasys. All rights reserved.
and "Loading Material" (page 97)
and
for instructions.
"Viewing Head Details" (page
108)).
"Viewing Head Details" (page
108)).
"Viewing Head Details" (page
Warnings at Build Start
"Loading Material" (page 97)
for instructions.
57)).
for
57)).
57)).
Page 193